ACRYL FAST

Area of ​​use: doors, window frames, windowsills and wall joints, gaps; stairs, floors, walls, ceiling joints and gaps; for sealing and filling concrete, plaster, plasterboard, wood cracks, cracks, joints inside buildings.

Properties: can be painted after 10 minutes, elastic, weak, specific smell, adheres and hardens on various (except bituminous and polyethylene) surfaces, unhardened Acryl Fast can be washed with water, and hardened can be removed mechanically.

Surface preparation: surfaces must be clean, firm, degreased, rust-free, ferrous metal surfaces must be primed or painted. It is recommended to prime weak mineral surfaces with PRO primer UNIGRUNT before applying Acryl Fast.

Working conditions: substrate and ambient temperature during work and drying must not be lower than +5°C and not higher than +40°C. The optimal working conditions are at a temperature of +20°C and 65% relative air humidity, at lower ambient temperatures or higher relative air humidity, the period of time after which Acryl Fast can be painted increases.

Application: Apply to sealing surfaces or apply to caulking, putty joint, gap or seam and remove excess with a damp cloth. The width of the seam is not less than 5 mm. and not more than 20 mm., seam depth not more than 5 mm.

Drying time: at an air temperature of +20°C and a relative air humidity of 65%: the surface dries after ~20 min.

Cleaning tools: Rinse tools with water immediately after work.

Color: White.

Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!