FASADA
For painting facades
and other mineral surfaces.
2 classes, resistant to
wet rubbing, fully matte.
Fields of application: painting and re-painting of structural acrylic plaster, brick, concrete, plaster, different boards, plasterboards and other mineral surfaces outside and inside.
Properties: contains no solvents, water-diluted, deep matte, mild specific odour, forms a water vapour-permeable film resistant to climatic conditions and wet cleaning (2 class), hides the surface defects.
Surface preparation: surfaces must be clean, firm and dry. Remove all adhesion-reducing materials such as oil, grease, dust, adhesives, mortar, old peeling paint, chalky surface. Clean the interior and exterior mineral surfaces contaminated by mold, other fungi, algae and other dirt with PRO cleaner BIO STOP. Prime such prepared surfaces with PRO primer the SILSIL. Newly painted cement surfaces must be primed twice before painting. If necessary, cover surfaces outside with PRO putty FASAD, inside use UNIVERSAL. If the layers must be grinded, prime them with PRO primer SILSIL as well as before painting.
Painting conditions: surface and ambient temperature during work and drying must be at least +5°C; optimum conditions are at +20°C and 65% RH. The cement surfaces must be ripe (new plaster can be painted no earlier than after 28 days and concrete no earlier than after 90 days). Make sure that no aggressive chemicals migrate to the painted surface. Do not work in direct sunlight in strong drafts or rain.
Painting: it is recommended to use the paint of a single batch and single pigmentation for the same area. Different batches of paint mix in one container and apply at once on the whole surface. This will help to avoid different shades. Stir the paint carefully; you can dilute the paint with water up to 10%. Paint in 2 layers with a brush, roller or sprayer. Consumption: 4-6 m²/l (painting in 2 layers).
Drying time: at +20°C temperature and 65% relative air humidity the paint is not sticky after half hour; paint repeatedly after 4 - 6 hours. Protect from rain during drying. Paint film gets it full firmness after at least 24 days. Cleaning of tools: wash the tools with water immediately after use.
Storage and carriage conditions: at least +5°C and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!
Environmental and work safety: do not pour paint into drains, water reservoirs or soil. Avoid breathing vapor/aerosol. Avoid contact with eyes, skin or clothing. In case of insufficient ventilation, wear suitable respiratory protective equipment. If swallowed, immediately call a poison control center or doctor. Keep away from children.
The volatile organic compounds: 1.1.3c) the VOC threshold limit – 40 g/l. The maximum in ready to use product is no more than 39,95 g/l.
Duration of validity: 18 months after manufacture date. See package.
In case of any questions, contact the specified phone number.
Gaminame aukščiausios kokybės produktus: dažus, glaistus, gruntus, tinkus, klijus, lakus, sandariklius, dekoravimo medžiagas, aliejus ir impregnantus medienai - viską, ko reikia Jūsų namų remontui nuo grindų iki lubų.