A primer with a quartz sand
filler that particularly improves
adhesion to the surface.

Šios konfiguracijos produktų neturime
About product

Area of ​​use: for priming very dense surfaces before grouting or gluing tiles. For interior work. Properties: significantly improves adhesion, has a weak, specific smell, red color. Surface preparation: The surface to be primed must be clean, firm and dry. To remove adhesion-reducing substances - grease,
grease, dust, glue residues, old peeling paint. Glazed tiles,
enameled surfaces, painted with oil paints should be evenly
brushed until the surface is completely matte and dust removed.

Priming conditions: the temperature of the substrate and the
environment during work and drying must not be lower than +5°C,
the optimal working conditions are at a temperature of +20°C
and 65% relative air humidity. Priming: mix the primer very well before use, do not dilute.
Apply one layer evenly with a brush or brush, rubbing well
into the surface to be primed.

Consumption: 0.3 - 0.5 kg/m² depending on the absorbency
of the surface.

Drying time: at an air temperature of +20°C and a relative
air humidity of 65%: 4 - 6 hours. After priming surfaces
that absorb little moisture (glazed tiles, surfaces painted
with enamel, oil paints), further work (plastering, puttying,
gluing tiles) can be done no earlier than 24 hours later.

Cleaning tools: Wash tools with water immediately after work. Storage and transport conditions: at a temperature not lower
than +5°C and not higher than +30°C in a tightly closed container.
Protect from direct sunlight and freezing!

Environmental and occupational safety: Do not pour the primer
into drains, watercourses or soil. The primer has a
specific smell.
Avoid breathing vapor/aerosol. Avoid contact with eyes,
skin or clothing.
In case of insufficient ventilation, use suitable
respiratory protection.
If swallowed, call a poison control and information office or seek medical
attention immediately. Keep out of reach of children.
EUH208 - may cause an allergic reaction.

3(2H)isothiazolone, 5-chloro-2-methyl
mixture with 2-methyl-3(2H)-isothiazolone,
and 2,2',2'' - (Hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol.