FINISCH+

Field of application: plasterboard, plasterboard products after their secondary processing, plasterboard factory panels with an intermediate layer of porous cardboard, plasterboard panels, fiber-reinforced plasterboard surface leveling inside buildings before painting 1 - 5 water class dispersion paints or wallpapering. For interior work.

Properties: ready-to-use, pigmented, good adhesion to the surface, water-based, mild, specific smell, easy to apply and smooth, long working time, extremely strong and weakly water absorbent.

Surface preparation: rough surfaces must be primed with MARMUR, LIGHT MACRO, UNIVERSAL or LIGHT MICRO putty before applying FINISCH+ putty, and smooth surfaces (e.g. plasterboard) can be immediately putty with FINISCH+ putty. The surfaces to be plastered must be clean, firm and dry. To remove substances that reduce adhesion - grease, grease, dust, glue, mortar residues, old peeling paint, chalky surfaces. Before grouting, prime hard surfaces prepared in this way with PRO PENETRATING, CONsolidating primer, and weak, porous, calcareous or chalky surfaces with PRO primer SPECIAL BLUE.

Sealing conditions: the substrate and ambient temperature during work and drying must not be lower than +5°C, optimal sealing conditions are at a temperature of +20°C and 65% relative air humidity.

Putty: Before use, stir the putty lightly until smooth. Putty should be applied manually (with a trowel) or mechanized in a layer of 0.1-0.5 mm and leveled. It is possible to putty again (apply another layer of putty) only after the first layer of putty has completely dried. Between the plastered layers, if the plastered surface was scrubbed, prime with PRO PENETRATING, CONsolidating primer. Before painting, if the plastered surface was scrubbed, prime with PRO primer UNIGRUNT, if the surface was not scrubbed, no priming is necessary.

Consumption: 0.2 - 0.9 kg/m² depending on the smoothness of the putty surface.

Drying time: at an air temperature of +20°C and a relative air humidity of 65%: ~1.5 - 3 hours.

Cleaning tools: Rinse tools with water immediately after work.

Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from freezing!

Environmental and occupational safety: Do not pour putty into drains, watercourses or soil. Avoid contact with eyes, skin or clothing. If swallowed, call a poison control and information office or seek medical attention immediately. Keep out of reach of children. EUH208 - May cause an allergic reaction. Contains 3(2H)isothiazolone, 5-chloro-2-methyl mixture with 2-methyl-3(2H)-isothiazolone, 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3 -one and 2,2',2''-(Hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol