For the first putty layer,
coarse grain with a light filler. T
he thickness of the applied
layer is 0.5 - 10 mm.

Šios konfiguracijos produktų neturime
About product
Safety Data Sheet

Fields of application: for the levelling of cement and other coarse surfaces indoors before applying fine grained fillers, painting with water dispersion paints of class 1 – 5 and wallpapering.

Properties: ready to use, with light filler, which is lighter up to 45% in comparison with other putties, have heat and sound insulation properties, colour-mixing, good adhesion to the surface, with a mild, characteristic odour, easy applied and levelled, has a long working time, very strong and a weak adsorbing water.

Surface preparation: the surface to be primed, must be clean, firm and dry. Remove all adhesion-reducing materials - oil, grease, dust, adhesives, mortar, old peeling paint, chalky surface. Before applying the filler, cover the prepared surfaces with the primer PRO SKVARBUSIS, SUTVIRTINANTIS, and cover weak and porous surfaces with the primer PRO.UNIGRUNT.

Working conditions: the base and ambient temperature during the work and drying should not be lower than +5°C; the optimum priming conditions are +20°C and 65% RH.

Use: mix the filler well before use. Apply the filler manually (with a spatula) till 10mm layer and level it. For mechanically application use special prepared putty with the same features. A second layer can be applied only after the first layer of filler has completely dried. If the primed surface has been polished, cover it with the primer PRO SKVARBUSIS, SUTVIRTINANTIS between the layers. Prior to painting, if the primed surface has been polished, cover it with the primer PRO.UNIGRUNT.

Consumption: 0.5-10l/m² depending on the smoothness of the primed surface.

Drying time: when the air temperature is 20°C and the relative air humidity is 65%: 1 mm applied putty layer could be polished after 18 hours, putty completely dried after 36 hours.

Cleaning of tools: the tools must be washed with water immediately after use.

Storage and carriage conditions: in a temperature not lower than +5°C and not higher than +30°C, in a tightly closed container. Protect from direct sunlight and freezing!

Environmental and work safety: do not pour into drains, waters or soil. Avoid breathing vapor/aerosol. Avoid contact with eyes, skin or clothing. In case of insufficient ventilation, wear suitable respiratory protective equipment. If swallowed, immediately call a poison control center or doctor. Keep away from children.

Duration of validity: 18 months from date of manufacture. Look on the package.

In case of a question, call the indicated numbers.