Putty For Wood LV
- Home
- Catalog
- Putties
- Putties for wood
- Putty For Wood LV
For wooden surfaces inside buildings,
the thickness of the applied
layer is 0.5 - 5 mm.
Field of application: ready-to-use for filling and levelling cracks, and holes in wood inside buildings. Putty can also be used to fill defects in concrete, plaster and gypsum surfaces. Do not use it for whole base surface puttying.
Surface preparation: the surface must be clean, firm and dry, wood moisture - no more than 10%.
Use: mix and apply with a putty trowel in a layer no thicker than 5 mm. The next layer of putty can be applied only after the first layer of putty has completely dried.
Drying time: ~1 – 36 hours.
Storage conditions: at least +5ºC and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!
Environmental and work safety: Avoid contact with eyes, skin or clothing. If swallowed, immediately call a poison control center or doctor. Has a specific odour. Keep away from children.
Duration of validity: 18 months after the manufacture date. See package. In case of any questions, contact the specified phone number.
