EKO.REIBER

Field of application: structural plastering of plastered, concrete, silicate blocks, plasterboard, brickwork and other mineral surfaces inside buildings.

Features: ready for use, good adhesion to the surface, easy to apply and level, weak, specific smell, tintable.

Surface preparation: Surfaces must be clean, sound and dry. To remove adhesion-reducing substances - grease, grease, dust, glue, mortar residues, old peeling paint, chalky surfaces. Weak and porous surfaces must first be primed with PRO UNIGRUNT primer, then with PRO.KONTAKT adhesion-enhancing primer, solid surfaces (concrete, GKP surfaces) should be immediately primed with PRO.KONTAKT adhesion-increasing primer (if the decorative plaster is tinted, the primer is also recommended to be tinted with the color corresponding to the decorative plaster).

Working conditions: the substrate and ambient temperature during work and drying must not be lower than +5°C and not higher than +30°C, the optimal working conditions are at a temperature of +20°C and 65% relative air humidity. Cement surfaces must be mature (apply EKO.REIBER structural plaster on new plaster or reinforcement mixture layer no earlier than 28 days, and on concrete - no earlier than 90 days). Make sure that aggressive chemical substances do not migrate to the surface applied with structural plaster EKO.REIBER.

Plastering: mix the acrylic structural plaster well before use. Apply the structural plaster manually (with a metal trowel) and smooth it with a plastic trowel, forming the desired pattern ("Lieutia" - vertical, "kirvarpa" - circular movements).

Costs: depending on fraction size 1.5mm – 1.6-2.1kg/m²; 2.0mm – 2.7-3.2kg/m²; 2.5mm – 3.2-3.5kg/m²; 3.0mm – 3.5-4.0kg/m².

Drying time: at +20°C temperature and 65% relative air humidity: ~24 hours.

Cleaning tools: Rinse with water immediately after work.

Color: White, various shades available.

Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from freezing!

Technical data: binder - copolymer acrylic dispersion; density (comparative weight) – 1.8 kg/l; amount of non-volatile substances - ? 80%; fraction size - 1.5mm 2.0mm, 2.5mm, 3.0mm; the diluent is water.

Environmental and work safety: Do not pour plaster into drains, water bodies or soil. It has a specific smell. Try not to inhale the vapors. Avoid contact with eyes, skin or clothing. If swallowed, call a poison control and information office or seek medical attention immediately. Keep out of reach of children. EUH208 - May cause an allergic reaction. Contains 3(2H)-isothiazolone, 5-chloro-2-methyl- mixture with 2-methyl-3(2H)-isothiazolone, 1,2-benzisothiazol-3(2H)-one and 2-methyl-2H-isothiazolone - 3-one.