SILSIL

Field of application: deep-absorbing, for priming various porous, highly moisture-absorbing mineral and concrete surfaces before painting with PRO FASADA and FASAD.SILICON paints. The dried primer forms a film that is highly permeable to water vapor, resistant to moisture. For interior and exterior works.

Surface preparation: surfaces must be clean, strong and dry. Remove all adhesion-reducing materials such as grease, oil, dust, glue residue, old paint, chalky surface. New plaster or concrete can be primed not earlier than after 14 days.

Working conditions: surface and ambient temperature during work and drying must be at least +5°C; optimum conditions are at +20°C and 65% RH.

Use: Prime evenly with a brush. Highly moisture-absorbing surface (e.g. silicate bricks) prime in 2 layers.

Consumption:  50 - 200 ml/m² depends on surface absorption.

Drying time: at +20°C temperature and 65% relative air humidity 1 – 3 hours.

Cleaning of tools: wash the tools with water immediately after use.

Storage and carriage conditions: at least + 5ºC and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!

Environmental and work safety: do not pour into drains, water reservoirs or soil. Avoid breathing vapor/aerosol. Avoid contact with eyes, skin or clothing. In case of insufficient ventilation, wear suitable respiratory protective equipment. If swallowed, immediately call a poison control center or doctor. Keep away from children.

Volatile organic compounds: 1.1.8h) VOC limit value 30g/l. The maximum in ready to use product 29,95g/l.

Duration of validity: 18 months after manufacture date. See package.

In case of any questions, contact the specified phone numbers.